Push/Pull/Legs · Upper body

PPL Upper Builder

Push and pull days carry most of the exercises, and one leg day keeps your legs progressing. At five days your chest, back, delts and arms train twice a week, and your chest and back get four exercises each.

Training days
3–5
Split
Push/Pull/Legs
Focus
Upper body

In ELVT since

Key takeaways

  • Two push and two pull days against one leg day: at five days your upper body gets nearly four times as many exercises as your legs.
  • At five days, ELVT’s pick for an upper-body focus at that day count, chest and back get four exercises each, so they can carry the most sets as you progress.
  • Your legs train once a week, at five days with two quad exercises and one each for hamstrings, glutes and calves: built to keep them progressing, not to bring them up.
  • It comes at 3, 4 and 5 days, intermediate level at each. From six days, the upper-body push/pull/legs program in ELVT is PPL + Arms & Delts.

Who it’s for

  • Your chest, back, shoulders or arms lag behind your legs, and you want them to get most of your training time.
  • You can train five days a week; three or four days work too.
  • You like push/pull/legs and are fine with one leg day a week for a block.
  • You want two sessions a week for your chest, back, delts and arms without training six days.

Pick another blueprint if…

  • you want your legs to keep pace: PPL + Upper/Lower trains every big muscle twice in the same five days.
  • you can train six days or more: PPL + Arms & Delts is the upper-body push/pull/legs program from six days, with a day just for arms and delts.
  • four days is your number: Upper/Lower Upper Builder is ELVT’s pick for an upper-body focus at four days.
  • you train three days: Full Body Upper Builder is ELVT’s pick for three upper-focused days and trains your chest and back three times.
Your week

Your week, day by day

Choose your number of training days. Each workout lists its exercises in training order, one line per exercise, named by the muscle it trains.

In the app, ELVT fills every line with an exercise for that muscle, and you can swap it for one you prefer. A muscle listed twice in a workout gets two exercises.

5 training days in a 7-day cycle

ELVT’s pick for 5 days · Upper body Level: Intermediate 2 rest days 5 exercises per workout

Push, pull and legs, a rest day, then a second push and pull day and another rest day. Every workout has five exercises, and both push days open with two chest exercises. Intermediate level.

Start with this blueprint in ELVT
  1. Day 1 Push A
    1. Chest
    2. Chest
    3. Front Delts
    4. Side Delts
    5. Triceps
  2. Day 2 Pull A
    1. Back
    2. Back
    3. Rear Delts
    4. Biceps
    5. Abs
  3. Day 3 Legs
    1. Quads
    2. Hamstrings
    3. Quads
    4. Glutes
    5. Calves
  4. Day 4 Rest Day
  5. Day 5 Push B
    1. Chest
    2. Chest
    3. Front Delts
    4. Side Delts
    5. Triceps
  6. Day 6 Pull B
    1. Back
    2. Back
    3. Rear Delts
    4. Traps
    5. Biceps
  7. Day 7 Rest Day
How often each muscle trains
Muscle Days per cycle Exercises per cycle
Chest 2 4
Back 2 4
Traps 1 1
Front Delts 2 2
Side Delts 2 2
Rear Delts 2 2
Biceps 2 2
Triceps 2 2
Quads 1 2
Hamstrings 1 1
Glutes 1 1
Calves 1 1
Abs 1 1

Back: your lats and mid-back, trained with pulldowns, pull-ups and rows.

Traps: trained with shrugs, and in your rows and deadlifts.

3 training days in a 7-day cycle

Level: Intermediate 4 rest days 5–7 exercises per workout

One push and one pull day of seven exercises each, and a leg day of five: quads, hamstrings, glutes, calves and abs. Every muscle trains once a week, except abs, which get one exercise on the pull day and one on the leg day. Intermediate level; at three upper-focused days ELVT recommends Full Body Upper Builder.

Start with this blueprint in ELVT
  1. Day 1 Push
    1. Chest
    2. Chest
    3. Front Delts
    4. Side Delts
    5. Triceps
    6. Side Delts
    7. Triceps
  2. Day 2 Rest Day
  3. Day 3 Pull
    1. Back
    2. Back
    3. Rear Delts
    4. Biceps
    5. Traps
    6. Biceps
    7. Abs
  4. Day 4 Rest Day
  5. Day 5 Legs
    1. Quads
    2. Hamstrings
    3. Glutes
    4. Calves
    5. Abs
  6. Day 6 Rest Day
  7. Day 7 Rest Day
How often each muscle trains
Muscle Days per cycle Exercises per cycle
Chest 1 2
Back 1 2
Traps 1 1
Front Delts 1 1
Side Delts 1 2
Rear Delts 1 1
Biceps 1 2
Triceps 1 2
Quads 1 1
Hamstrings 1 1
Glutes 1 1
Calves 1 1
Abs 2 2

Back: your lats and mid-back, trained with pulldowns, pull-ups and rows.

Traps: trained with shrugs, and in your rows and deadlifts.

4 training days in a 7-day cycle

Level: Intermediate 3 rest days 5–6 exercises per workout

The cycle opens with a leg day, then a rest day, push and pull back to back, another rest day, and an upper day that trains your chest, back, side and rear delts and arms a second time before a last rest day. Intermediate level; at four upper-focused days ELVT recommends Upper/Lower Upper Builder.

Start with this blueprint in ELVT
  1. Day 1 Legs
    1. Quads
    2. Hamstrings
    3. Quads
    4. Glutes
    5. Calves
    6. Abs
  2. Day 2 Rest Day
  3. Day 3 Push
    1. Chest
    2. Chest
    3. Front Delts
    4. Side Delts
    5. Triceps
  4. Day 4 Pull
    1. Back
    2. Back
    3. Rear Delts
    4. Biceps
    5. Traps
  5. Day 5 Rest Day
  6. Day 6 Upper
    1. Back
    2. Chest
    3. Side Delts
    4. Rear Delts
    5. Biceps
    6. Triceps
  7. Day 7 Rest Day
How often each muscle trains
Muscle Days per cycle Exercises per cycle
Chest 2 3
Back 2 3
Traps 1 1
Front Delts 1 1
Side Delts 2 2
Rear Delts 2 2
Biceps 2 2
Triceps 2 2
Quads 1 2
Hamstrings 1 1
Glutes 1 1
Calves 1 1
Abs 1 1

Back: your lats and mid-back, trained with pulldowns, pull-ups and rows.

Traps: trained with shrugs, and in your rows and deadlifts.

What your week feels like

Say Day 1 is a Monday and you train five days. Monday is Push A: two chest exercises first, then front delts, side delts and triceps. Tuesday is Pull A: two back exercises in a row, then rear delts, biceps and abs. Wednesday is Legs: quads, hamstrings, a second quad exercise, glutes and calves. Thursday is off.

Friday is Push B, in the same order as Push A: two chest exercises, then front delts, side delts and triceps. Saturday’s Pull B has two back exercises again, then rear delts, traps and biceps. Sunday is off.

Four of your five workouts are upper body, and every one of them has five exercises, so no session runs long. Your legs get one focused day in the middle of the week, with a rest day right after it.

Why it works

More exercises where you want growth. ELVT splits a muscle’s weekly sets across its exercises, and one exercise can only carry so many before more sets stop paying off. So this program gives your upper body more exercises rather than more sets per exercise: four for chest, four for back, two each for front, side and rear delts, biceps and triceps.

Twice a week for your upper body. Most lifters grow well when a muscle trains about twice a week. Your chest, back, delts and arms get exactly that; the traps get one exercise on Pull B as an extra.

No muscle two days in a row. Push and pull use opposite muscles, and legs use neither, so back-to-back training days cost you little. Your chest trains on Monday and Friday, with the weekend before the next Monday.

Legs on a smaller dose, not forgotten. One leg day with five exercises keeps your quads, hamstrings, glutes and calves trained while your upper body takes the priority, and ELVT keeps progressing their weights and sets from your feedback. Plan a balanced program for your next block if your legs should catch up.

Choosing your day count

Pick the number of days you can keep for the whole block, not the number you manage in a perfect week.

  • Three days: one long push and one long pull day of seven exercises, and a short leg day. Most muscles train once a week; Full Body Upper Builder is ELVT’s pick for three upper-focused days.
  • Four days: legs, push, pull and an upper day, so your upper body trains twice. Upper/Lower Upper Builder is ELVT’s pick at four.
  • Five days: the version this program is built around, and ELVT’s pick for five upper-focused days.
  • Six days or more: switch to PPL + Arms & Delts, the upper-focused push/pull/legs program for six to ten days.

Whatever you pick, ELVT keeps the structure and adjusts the sets: the more often a muscle trains, the fewer sets each session has to carry.

Running it in ELVT

Weeks 1 to 4, then a deload

Pick this blueprint in ELVT’s mesocycle builder and the app runs it as a training block. By default that is five weeks: four that get harder step by step, then a deload. Here is what each one feels like.

  1. Week 1

    3 reps in reserve

    Comfortably hard: every set stops about three reps short of failure. If you have done the exercise in an earlier block, ELVT works out your starting weight from those sessions; otherwise you pick a weight you could lift about three more times. Each muscle starts near the low end of its weekly set range for your level.

  2. Week 2

    2 reps in reserve

    One rep closer to failure. If last week’s weight felt manageable, it goes up by about 2.5 % as a Novice, 1 % as an Adept or 0.5 % as a Virtuoso, and your reps rise as the reserve shrinks. After every exercise you answer a few one-tap questions about soreness, pump and your joints; ELVT uses them to add sets where you recovered well and to hold or cut them where you did not.

  3. Week 3

    1 rep in reserve

    Heavier again, and the muscles that handled their sets have more of them. Most sets now end one rep short of failure. This is the week that feels like real work.

  4. Week 4

    0 reps in reserve

    The last hard week: your sets go all the way to failure. ELVT plans this once, at the end of the block, never week after week.

  5. Week 5

    Deload

    Half the sets at about 85 % of the weight, same reps: easy on purpose. Fatigue drains away, and ELVT plans your next block’s starting sets from what you actually did in this one.

In a version with an 8-, 9- or 10-day cycle, each “week” is one full cycle. You can plan a longer block (up to 12 weeks); the reserve then stays at one rep until the last hard week. A muscle gains at most 1, 2 or 3 sets a week (Novice, Adept, Virtuoso), and never more than the top of its range.

Supported by ads

ELVT Free

  • This blueprint at every day count, and every other blueprint in the library
  • An exercise in every slot, swappable for the lifts you like
  • Target weights and reps for every set, every week
  • Reps-in-reserve steps and an automatic deload week
  • Sets that adapt to your soreness, pump and joint feedback
  • Starting weights from your own history
7-day free trial

ELVT Pro

  • Everything in Free, without ads
  • A readiness check-in before each workout: on a bad day, a lighter session, a recovery session or a rest day
  • An early deload when your fatigue stays high
  • In-session autoregulation: a heavier next set when you beat your target
  • Your fatigue line and weekly sets per muscle at a glance

The science behind it

Every blueprint here follows what training research finds most consistently. These are the studies behind the structure.

Questions

Is one leg day a week enough?

For a block where your upper body has the priority, it keeps your legs trained: at five days the leg day has two quad exercises plus hamstrings, glutes and calves, and ELVT still progresses their weights and sets from your feedback. If you want your legs to grow as fast as your upper body, pick a balanced program such as PPL + Upper/Lower.

Why does this program stop at five days?

A sixth day changes what makes sense. From six days ELVT’s upper-focused push/pull/legs program is PPL + Arms & Delts, which keeps two push and two pull days, adds a day for biceps, triceps and delts, and from seven days a second leg day.

Where do the extra sets for my upper body come from?

From more exercises, not from more sets per exercise. ELVT splits each muscle’s weekly sets across its exercises, and one exercise can only carry so many. With four exercises each at five days, your chest and back have room for far more weekly sets than your quads with two.

What exercises go into each slot?

Each line is one exercise for that muscle. ELVT fills it from its exercise library, and you can swap any slot for the lift you prefer. With two chest and two back exercises per session, mix a heavy compound (a press or a row) with a second angle (an incline press, a fly, a pulldown). The front-delt slot on each push day suits an overhead press.

Do I have to plan the deload myself?

No. ELVT ends every block with a deload week by default: half the sets at about 85 % of the weight. With ELVT Pro, the app can also offer an earlier deload when your fatigue stays high.

Download for free from App Store & Google Play

Get ELVT on iOS and Android. No fluff—just real progress, right from your pocket.

Get ELVT