Push/Pull/Legs · Balanced

PPL + Full Body

Push/pull/legs in four days: a full-body workout opens the week, then push, pull and legs follow on three days in a row. Your chest, back, quads, hamstrings and glutes train twice, and each day of the classic split keeps its focus.

Training days
4
Split
Push/Pull/Legs
Focus
Balanced

In ELVT since

Key takeaways

  • Four workouts: a full-body day, a rest day, then push, pull and legs on three days in a row, and two rest days.
  • Chest, back, quads, hamstrings, glutes, side delts and abs train twice; arms, front and rear delts and calves get one exercise of their own.
  • The full-body day covers the big muscles early, so push, pull and legs stay short at five exercises each.
  • It exists at four days only, at intermediate level; at three, six or nine days the classic push/pull/legs split takes over.

Who it’s for

  • You like push, pull and leg days but can train only four days, and once a week per muscle is not enough for you.
  • You want one full-body session that gets the week going.
  • Three training days in a row do not put you off, as long as two rest days follow.

Pick another blueprint if…

  • you want ELVT’s pick for a balanced four-day week: Upper/Lower Classic also trains your arms and calves twice.
  • you can train three, six or nine days: Push/Pull/Legs Classic is the classic split, and ELVT’s pick for a balanced week at six and nine days.
  • you can train five days: PPL + Upper/Lower adds upper and lower days to push, pull and legs, and is ELVT’s pick for a balanced five-day week.
Your week

Your week, day by day

Each workout lists its exercises in training order, one line per exercise, named by the muscle it trains.

In the app, ELVT fills every line with an exercise for that muscle, and you can swap it for one you prefer. A muscle listed twice in a workout gets two exercises.

4 training days in a 7-day cycle

Level: Intermediate 3 rest days 5–7 exercises per workout

Day 1 is the full-body workout, Day 2 a rest day, Days 3 to 5 push, pull and legs, then two rest days. Chest, back and quads get three exercises each over their two sessions.

Start with this blueprint in ELVT
  1. Day 1 Full Body
    1. Quads
    2. Chest
    3. Back
    4. Hamstrings
    5. Glutes
    6. Side Delts
    7. Abs
  2. Day 2 Rest Day
  3. Day 3 Push
    1. Chest
    2. Chest
    3. Front Delts
    4. Side Delts
    5. Triceps
  4. Day 4 Pull
    1. Back
    2. Back
    3. Rear Delts
    4. Biceps
    5. Abs
  5. Day 5 Legs
    1. Quads
    2. Hamstrings
    3. Quads
    4. Glutes
    5. Calves
  6. Day 6 Rest Day
  7. Day 7 Rest Day
How often each muscle trains
Muscle Days per cycle Exercises per cycle
Chest 2 3
Back 2 3
Front Delts 1 1
Side Delts 2 2
Rear Delts 1 1
Biceps 1 1
Triceps 1 1
Quads 2 3
Hamstrings 2 2
Glutes 2 2
Calves 1 1
Abs 2 2

Back: your lats and mid-back, trained with pulldowns, pull-ups and rows.

What your week feels like

Say Day 1 is a Monday. Full Body opens the week: quads, chest, back, hamstrings, glutes, side delts and abs, one exercise each, big muscles first. Tuesday is off.

Then come three days in a row. Wednesday is Push: two chest exercises, then front delts, side delts and triceps. Thursday is Pull: two back exercises, rear delts, biceps and abs. Friday is Legs: quads, hamstrings, a second quad exercise, glutes and calves. Saturday and Sunday are off.

The full-body day feels like a broad, heavy start: seven muscles, one exercise each. The three split days are short and focused, five exercises each, and each one hits its muscles harder than the full-body day did. By Friday your legs come back fresh, four days after their first session.

Why it works

Two sessions for the big muscles. Most lifters grow well when a muscle trains about twice a week. The full-body day gives your chest, back, quads, hamstrings and glutes their first session, and push, pull and legs their second. Side delts and abs also train twice; your arms, front and rear delts and calves get one exercise of their own.

Sets split across exercises. ELVT splits a muscle’s weekly sets across its exercises, and one exercise can only carry so many. Chest, back and quads have three exercises each, one on the full-body day and two on their split day, so they can take the most sets as you progress.

Big muscles first. The full-body day opens with quads, chest, back, hamstrings and glutes, and every split day opens with its biggest muscle: chest on push day, back on pull day, quads on leg day. That is where your heavy compound lifts belong.

Rest where it counts. Chest gets 48 hours between the full-body day and push day, and back 72 hours before pull day. Your legs get four days between the full-body day and leg day, and the two rest days at the end of the week sit right after your hardest leg session.

Choosing your day count

This program exists at four days only. It is a way to keep push, pull and leg days when four days are what you have.

  • Three days: Push/Pull/Legs Classic, with each muscle once a week, or Full Body Classic, ELVT’s pick for a balanced three-day week.
  • Four days: this program, or Upper/Lower Classic, ELVT’s pick for a balanced four-day week, which trains your arms and calves twice as well.
  • Five or more days: PPL + Upper/Lower at five and seven, Push/Pull/Legs Classic at six and nine.

Pick the number of days you can keep for the whole block, not the number you manage in a perfect week.

Running it in ELVT

Weeks 1 to 4, then a deload

Pick this blueprint in ELVT’s mesocycle builder and the app runs it as a training block. By default that is five weeks: four that get harder step by step, then a deload. Here is what each one feels like.

  1. Week 1

    3 reps in reserve

    Comfortably hard: every set stops about three reps short of failure. If you have done the exercise in an earlier block, ELVT works out your starting weight from those sessions; otherwise you pick a weight you could lift about three more times. Each muscle starts near the low end of its weekly set range for your level.

  2. Week 2

    2 reps in reserve

    One rep closer to failure. If last week’s weight felt manageable, it goes up by about 2.5 % as a Novice, 1 % as an Adept or 0.5 % as a Virtuoso, and your reps rise as the reserve shrinks. After every exercise you answer a few one-tap questions about soreness, pump and your joints; ELVT uses them to add sets where you recovered well and to hold or cut them where you did not.

  3. Week 3

    1 rep in reserve

    Heavier again, and the muscles that handled their sets have more of them. Most sets now end one rep short of failure. This is the week that feels like real work.

  4. Week 4

    0 reps in reserve

    The last hard week: your sets go all the way to failure. ELVT plans this once, at the end of the block, never week after week.

  5. Week 5

    Deload

    Half the sets at about 85 % of the weight, same reps: easy on purpose. Fatigue drains away, and ELVT plans your next block’s starting sets from what you actually did in this one.

In a version with an 8-, 9- or 10-day cycle, each “week” is one full cycle. You can plan a longer block (up to 12 weeks); the reserve then stays at one rep until the last hard week. A muscle gains at most 1, 2 or 3 sets a week (Novice, Adept, Virtuoso), and never more than the top of its range.

Supported by ads

ELVT Free

  • This blueprint at every day count, and every other blueprint in the library
  • An exercise in every slot, swappable for the lifts you like
  • Target weights and reps for every set, every week
  • Reps-in-reserve steps and an automatic deload week
  • Sets that adapt to your soreness, pump and joint feedback
  • Starting weights from your own history
7-day free trial

ELVT Pro

  • Everything in Free, without ads
  • A readiness check-in before each workout: on a bad day, a lighter session, a recovery session or a rest day
  • An early deload when your fatigue stays high
  • In-session autoregulation: a heavier next set when you beat your target
  • Your fatigue line and weekly sets per muscle at a glance

The science behind it

Every blueprint here follows what training research finds most consistently. These are the studies behind the structure.

Questions

Does every muscle train twice?

Your big muscles do: chest, back, quads, hamstrings and glutes, and so do side delts and abs. Biceps, triceps, front and rear delts and calves get one exercise of their own a week. Most of them still work as helpers on the full-body day: your triceps and front delts in the chest press, your biceps and rear delts in the back exercise.

Why three training days in a row?

Push, pull and leg days share few main muscles, so each one trains while the others rest. After the leg day you get two rest days before the full-body workout starts the next week.

Which days of the week should I train?

Day 1 can be any day. A common rhythm: the full-body workout on Monday, rest on Tuesday, push, pull and legs from Wednesday to Friday, and a weekend off. Keep the order of the days: the rest day after the full-body workout gives your chest 48 hours before push day.

Can I run it with three or five days?

This program exists at four days only. With three or six days, Push/Pull/Legs Classic is the split; with five or seven, PPL + Upper/Lower. ELVT recommends a program for every day count in its mesocycle builder.

Do I have to plan the deload myself?

No. ELVT ends every block with a deload week by default: half the sets at about 85 % of the weight. With ELVT Pro, the app can also offer an earlier deload when your fatigue stays high.

Download for free from App Store & Google Play

Get ELVT on iOS and Android. No fluff—just real progress, right from your pocket.

Get ELVT